Cisco WS-C2960+24TC-S

A switch Cisco WS-C2960+24TC-S is one of the most trusted and reliable switches. It uses wired connectivity technology. Cisco IOS LAN Lite software has been installed in these switches for better and advanced performances. This software is a powerful license, especially for layer 2 switches. Also, it is the least expensive and least robust version of IOS. The three basic topologies used in the Cisco switches are Ethernet 10/100 Base-TX, Ethernet 10/100 Base-T, and Gigabit Ethernet Small Form-factor Pluggable (SFP) with a switching capacity of 16 Gbps. For a smooth startup and further flow of traffic, an internal power supply of nominal voltage AC 120/230 V is required with a frequency of 50/60 Hz. A redundant Power System (RPS) connector is attached which helps in providing enough power to all the connected PoE devices when an initial power supply of the switches fails to accomplish.

The remote management protocols include Hypertext Transfer Protocol (HTTP), Simple Network Management Protocol (SNMP) 1, 3, and 2c, Trivial File Transfer Protocol (TFTP), Remote Network Monitoring (RMON) 1and 2, and Telnet protocols. For various authentications, some authentication methods are recommended which include Remote Authentication Dial-In-User Service (RADIUS) and Terminal Access Controller Access Control System (TACAS+). There are 24 ports 10/1000Base-T (Twisted pair cabling) in total with Fast Ethernet RJ-45 connectors. It enhances the performance with active 64 VLANs and installation of 128 MB Random Access Memory (RAM) and 64 MB of flash memory. In addition, the jumbo frames of 9018 bytes are highly supported.

WS-C2960+24TC-S requires a minimum operating temperature of 32 degrees Fahrenheit to the maximum of 104 degrees Fahrenheit with a humidity range in non-condensing is 10% to 95%. On the other side, the minimum storage temperature requirement is -13 degrees Fahrenheit to the maximum of 158 degrees Fahrenheit with a humidity range of 10% to 95% acceptability. The miscellaneous Compliant Standards include VCCI Class A, FCC Class A certified, EN55024, EN 60950-1 Second edition, CSA C22.3 No. 60950-1 Second edition, FCC CFR47 Part 15, RoHS, EN 61000-3-3, and others. Whereas, the standards of the IEEE 802 series include 802.1ab (LLDP), 802.1s, 802.3ab, 802.3x, 802.3ad (LACP), 802.1Q, 802.3ah, and many more. The current status indications of port duplex mode, port transmission speed, system, power, and port status are checked throughout the connection.

Some of the major protocols and supports which are listed as main features in Cisco WS-C2960+24TC-S are, Link Aggregation Control Protocol (LACP), Quality of Services (QoS), VLAN support, Syslog support, Dynamic Trunking Protocol (DTP), Port Security, auto-negotiation, MAC address notification, Multicast storm control, Broadcast storm control, Port Aggregation Protocol (PAP), Rapid Spanning Tree Protocol (RSTP), IGMP snooping, Auto-sensing per device, and much more. Measuring the dimensions shows that the width is equal to 17.7 inches, the depth is 9.5 inches, and the height is 1.7 inches. The total weight is 7.94 lbs. or 3.6 kgs. It is easily portable which means you can carry it with you to any place anytime. It provides a lifetime warranty with complete repair and services options. If any additional services are needed, they can be done within a warranty time period along with a warranty card. So, avail all of these amazing features at a reasonable price.